CIC ( Copper - Invar™ - Copper ) With Maximum Width Of 600mm
Copper Invar Copper was introduced into the printed circuit board
industry to combat the differing coefficient of thermal expansion
encountered when bonding very dissimilar materials together.
In high temperature environments Copper Invar Copper is sometimes
use to strengthen the printed circuit board and control expansion.
Copper Invar Copper is a layer of invar which is a nickel
containing iron alloy sandwiched in between two layers of
copper.Copper Invar Copper is readily available in two thicknesses.
CIC foil is used for printed circuit boards with ground and power
planes and metal cores. The low CTE(coefficient of thermal
expansion)over a broad temperature range (-55℃-125℃) is crucial for
aerospace and some special fields.
Invar is a nickel iron alloy with ca. 1/3 nickel and 2/3 iron. Its
coefficient of thermal expansion CTE is about 1.5 ppm/K.
Implementation of CIC layers (copper-invar-copper-composite metal)
into multilayer PCBs is used to contol in plane expansion (CTExy).
Thermal stress at higher thermal cycles leads to fatigue and
fraction of solder joints.
Ceramic semiconductor components like leadless ceramic chip-carrier
(LCCC) are used for high reliable electronics. Differences of CTE
of the components of ca. 6-8 ppm/K im Bauteil versus ca. 16 ppm/K
of the PCB substrate lead to damages at the solder joint if no CIC
The bigger the BGA the more carefully has to be planned the
Normally two symmetrically Cu-Invar-Cu Layers of 0.15 mm thickness
each are arranged directly beneath the external layers. Cu-lnvar-Cu
layer can be connected electrically, but it is not recommended to
use it as power planes due to its impact on drills. On the other
hand, CIC can be used for heat spreading like power planes. Heat is
spreaded by the copper share ot CIC. Invar does not play a
significant roll in this view, because the thermal conductivity is
only 3% compared to copper.
Cu | FeNi36 | Cu
12.5% | 75% | 12.5%
Thermal conductivity: 1.10(xy plane)；0.19(z plane)W cm/cm²℃
Electrical conductivity: 14.5 m/Ω mm² (20℃,soft annealed)
Electrical Resistivity: 0.069 m/Ω mm² (20℃,soft annealed)
Modulus of Elasticity: 140000 N/mm²
CTE(Coefficient of thermal expansion): 2.4 to 5.6 ppm/℃ annealed
Why Choose Civen As Your Supplier :
- We are the most experienced copper manufacturer in China since 1998
;We have many
- Many important customer in China and oversea markets like:
Samsung(Korea), LG(Korea), Matsushita(China), BYD, and so on.
- We awarded a lot of certificates in this field such as CTI, SGS,
ISO 9001, and etc.
- We have inventory for many regular size in Shanghai , and we can
send goods out as soon as possible.